[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
slot enable
Syntax
slot enable slotNum [ subsystem ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Enables the module installed in the specified slot.
You cannot use this command on a slot that contains a primary SRP
module. There is no no version.
Options
-
slotNum—Number of the selected
slot in the router; for ERX-7xx models, a number in the range 0–6;
for ERX-14xx models, a number in the range 0–13; for the ERX-310
router, a number in the range 1–2; for the E120 router, a number
in the range 0–5; for the E320 router, a number in the range
0–16
-
subsystem—Type of subsystem
on the E320 router; use when the specified slotNumber is a slot that contains an SRP module
- srp—Indicates the SC on one or both SRP modules;
specify this keyword to enable only the portion of the SC on the individual
SRP module
- fabric—Indicates the portion of the switch fabric
on the SRP modules; specify this keyword to enable only an individual
fabric slice
Global Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
